Ten Startups That Will Revolutionize The Repairs To Upvc Windows Industry For The Better
Ten Startups That Will Revolutionize The Repairs To Upvc Windows Industry For The Better
Blog Article
Repairs to uPVC Windows
uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum or timber.
Cleaning and lubricating regularly UPVC windows and doors is vital. This will help prevent unnecessary repair costs and also improve energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.
For single pane windows it is relatively easy to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this case you'll need to source some plastic spacers that aid the new pane in being able to fit properly into the window frame.
Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not on the floor and could be trampled.
It's a good idea to seal the gap after the glass has been removed. This will stop water and drafts from entering your home until a professional arrives to fix the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is large, you might be interested in a security door that has an integrated window, as it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. As time passes, they may develop a number of problems such as sliding. A sagging uPVC window could cause issues with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are falling down.
Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll have to open the window to access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close your window and verify the fitting. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.
If you are unable to move the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.
uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it can also be due to the handle mechanism wears out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.
3. Water Leaks
If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.
This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking may need to be removed before a new layer of caulk can be applied. When it is time to uPVC repair, you should avoid over-caulking. This can make your window more difficult to clean and decrease its energy efficiency.
Make sure that the drainage holes do not have debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you may need to think about replacing the window.
Moldy sills and rotten ones are also signs of water leakage. This is a fungus window and door repair that thrives in damp conditions and can quickly spread throughout the home.
It is also important to note that if the leak originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens with the breeze. These are easily repaired by any skilled DIYer and are usually done within a few minutes.
Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's easy to change the hinges on a window however it is easier if someone else helps you hold the frame.
It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.
The problem can be caused either by opening the window incorrectly or by a poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to provide advice.
It is also important to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also reduce the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by several different factors. The hinges can also be misaligned due to wear, creating an opening where the sash meets frame. If they are beyond repair, it could be required to realign them. The interlock may also become unbalanced. This is located on the hinge's side, and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.
The second most frequent reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen draughts.
Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking out cold air.
With a little maintenance and repairs your windows made of upvc will provide an excellent level of insulation and security for your home. It is crucial to realize that all windows have a lifespan and eventually, they will reach the point when it's more efficient to replace them than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional as soon as you can.